Wilson Electronics Dual Band 40dB Wireless Amplifier (P/N 801201)
	Quantity in Basket: None P/N: 801201 Price: $369.00 Wilson Electronics 40dB In-Vehicle Amplifier, 824-894 MHz/1850-1990 MHz Frequency, 40 dB/40 dB Gain, dBm/ dBm Max RF, Works With AMPS, CDMA, EVDO, EDGE, UMTS, HSPDA, GPRS, GSM, TDMA
	Quantity:

Use for cars, pickups or semis only! This repeater is NOT strong enough for in-building use.

Wilson 40dB In-Vehicle Amplifier/Repeater for dual-band frequencies 824-894MHz and 1850-1990MHz (used by most cell providers except Nextel, Southern Linc and Mike). Requires no physical attachment to cell phone. A 12V DC power supply (cigarette lighter connection) and an internal low profile antenna are included. FME male connectors.

• Built in power control logic that ensures maximum gain
• Allows multiple phones to be used simultaneously
• Maximum of 3 watts output power
• Works with AMPS, CDMA, EVDO, EDGE, UMTS, HSPDA, GPRS, GSM and TDMA
• Includes LED to show power and overload shutdown/oscillation
• Overload protection circuit
• Automatic reset if overload condition occurs
• 4.5" x 3.5" x 1.25" and 1.5 lbs

The FCC approved Wilson Cellular Amplifier/Repeater has a better receiver than what's in your cellphone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cellphones. It also has a better transmitter with more than double the power of your cellphone. This allows your voice to be heard by distant cell sites, increasing coverage up to 50 miles or more. It requires no physical connection to your cellphone and allows multiple cellphones to be used at the same time. A cellphone using our amplifier is safer and will use less battery power because the phone thinks it's much closer to a cell site than it actually is. Phones vary their power output based on their proximity to cell sites. Therefore, your phone transmits less power - resulting in safer use and longer battery life.

The amplifier requires an external antenna

Use for cars, pickups or semis only! This repeater is NOT strong enough for in-building use.

Wilson 40dB In-Vehicle Amplifier/Repeater for dual-band frequencies 824-894MHz and 1850-1990MHz (used by most cell providers except Nextel, Southern Linc and Mike). Requires no physical attachment to cell phone. A 12V DC power supply (cigarette lighter connection) and an internal low profile antenna are included. FME male connectors.

• Built in power control logic that ensures maximum gain
• Allows multiple phones to be used simultaneously
• Maximum of 3 watts output power
• Works with AMPS, CDMA, EVDO, EDGE, UMTS, HSPDA, GPRS, GSM and TDMA
• Includes LED to show power and overload shutdown/oscillation
• Overload protection circuit
• Automatic reset if overload condition occurs
• 4.5" x 3.5" x 1.25" and 1.5 lbs

The FCC approved Wilson Cellular Amplifier/Repeater has a better receiver than what's in your cellphone. Its advanced electronics are very sensitive and able to receive small signals which would go undetected by most cellphones. It also has a better transmitter with more than double the power of your cellphone. This allows your voice to be heard by distant cell sites, increasing coverage up to 50 miles or more. It requires no physical connection to your cellphone and allows multiple cellphones to be used at the same time. A cellphone using our amplifier is safer and will use less battery power because the phone thinks it's much closer to a cell site than it actually is. Phones vary their power output based on their proximity to cell sites. Therefore, your phone transmits less power - resulting in safer use and longer battery life.

The amplifier requires an external antenna


You may also be interested in this/these product(s):

Code	Name	Price
ARC-00002	ARC Wireless Freedom Antenna (P/N ARC-00002)	$32.46
JB-110B	Junxion Box Wi-Fi Model without Data Card/Service (P/N JB-110B)	$699.00
4700001	VeriLink Corporation NetPath 2000 Wireless Router (P/N 4700001)	$805.00
301103	Wilson Electronics Dual-Band Magnet Mount Antenna (P/N 301103)	$32.46